https://mantisx.com/products/20mm-barrel-rail-mount-tube-adapter-rifle-gun-laser-flashlight-barrel-clamp-scope-mount-with-barrel-adapter
I have this one, it's alright for the price and works, the plate does bend if you tighten the screws down a good bit.
You gotta just buy and check the cheap Chinese crap from Amazon. I bought 2-3 before I found one that works, but I broke that one and bought another of the same for it to not fit, so it’s really just chance. I also later discovered that the little gap under the FSB on my barrel was narrower than most others, so it also has to do with the forging and milling of the FSB as well; that isn’t a critical dimension so I can imagine that it can vary significantly. The one I bought that worked, then didn’t work is no longer on Amazon either way. Sorry I don’t have a better answer but it was a crapshoot for me.
What you could do and I might still do is get any cheap one, cut it shorter right at one of the screw hole locations, and drill/tap a new hole in the rail piece and metal strap and it’ll for sure work too but that takes a bit more patience I guess.
You have to channel your inner Bubba through intense meditation before using the Dremel and everything will flow
It’s like the sorcerer supreme channeling dark magic in dr strange… using forbidden bubba powers for honorable clone purposes
https://mantisx.com/products/20mm-barrel-rail-mount-tube-adapter-rifle-gun-laser-flashlight-barrel-clamp-scope-mount-with-barrel-adapter I have this one, it's alright for the price and works, the plate does bend if you tighten the screws down a good bit.
Thanks. I did find one more from someone else, we‘Ll see if that works and if not I’ll snag that one
Do you have a bayonet lug? Could you just use a botach mount instead?
I could, it wouldn’t be authentic to the film though unfortunately
Could you update? Did you find a good one? This is the last piece to my build and it’s tough
You gotta just buy and check the cheap Chinese crap from Amazon. I bought 2-3 before I found one that works, but I broke that one and bought another of the same for it to not fit, so it’s really just chance. I also later discovered that the little gap under the FSB on my barrel was narrower than most others, so it also has to do with the forging and milling of the FSB as well; that isn’t a critical dimension so I can imagine that it can vary significantly. The one I bought that worked, then didn’t work is no longer on Amazon either way. Sorry I don’t have a better answer but it was a crapshoot for me. What you could do and I might still do is get any cheap one, cut it shorter right at one of the screw hole locations, and drill/tap a new hole in the rail piece and metal strap and it’ll for sure work too but that takes a bit more patience I guess.
Ended up going a different route with a bayonet lug mount. but thanks!